Packless spray FRP cooling tower
Product Name:
Packless spray FRP cooling towerModel No.:
无填料喷雾玻璃钢冷却塔Price:
电议
Product Abstract:
Packless spray FRP cooling tower
- Product Description
Packless spray FRP cooling tower
1, WGFB packless spray cooling tower by high low pressure centrifugal atomization device (nozzle pressure: 0.035 MPa) as a cooling element (of generation of the traditional packing tower packing and water distribution device, makes the whole tower almost an empty tower, the structure is greatly simplified.
2, WGFB packless spray cooling tower after the removal of packing and water distribution device, install the atomization device over the intakes and water injection direction and axial flow fan suction of air cooling, water has up and down two process at the same time, the cooling downstream cooling and countercurrent cooling two process.
3, GFN packless spray cooling tower by atomization device to spray water into mist, tiny granular even contact, make the air and water and cloth of packed tower is through the water sprinkler water distribution in membrane in contact with the cold wind on the packing.
4, GFN tower, cancelled due to packing tower body load decreases greatly, there is no need to more supporting beam slab, civil engineering structure is simplified, save construction investment.
The advantages of WGFB - packless spray tower:
Small resistance, small cooling temperature difference, approximation degree:
As WGFB cooling tower components (high low pressure centrifugal atomization device) to water injection into tiny droplets are 0.5 mm, the specific surface area is greater than the water filler dispersion as membrane of specific surface area, air water heat transfer surface area is large, and uniform water distribution, to avoid the packing aging deformation and blockage of dead zone and channel flow results in uneven distribution of cooling temperature, cooling effect is better than packed tower low operating cost, energy saving effect is remarkable:
GFN atomization device work pressure 0.035 MPa, hydraulic rotation type atomization device work pressure 0.2 MPa low 0.17 MPa, form a complete set of the pump power is reduced greatly. WGFB resistance for about half of the packed tower tower system, at the same time in the cooling water, fan facies, motor power fell to 60% of the packed tower, saving energy effect is remarkable, and eliminates the replacement of packing and the cost of the cloth water nozzle cleaning, operation cost is reduced greatly.
WGFB due to cancelled the packing tower, tower resistance drop to half of the original system, under the same fan, the fan performance curve shows that air volume increased to 1.2 times. Gas water ratio is increased to 1.2 times that of the original, so the cooling temperature is packed tower 2 ℃.
- Related Products
- [Return Home] [Print] [Go Back]