Square counterflow FRP cooling tower

Product performance and selection

1, the design parameters:

Industrial tower for: air wet bulb temperature tau = 28 ℃, the cooling tower temperature drop: 10 ~ 25 ℃.

Civil tower for: air wet bulb temperature tau = 28 ℃, the cooling tower temperature drop: 5 ~ 8 ℃.

2, need to know when the cooling water tower Q, feed water temperature t1, out of the tower water temperature t2, air wet-bulb temperature tau.

3, the material of the cooling tower can - 50 ℃ low temperature resistant, but for most of the average temperature is below - 10 ℃ when placing order, shall specify the area, in order to take the anti-icing measures.

4, circulating water turbidity is not greater than 50 mg/l, short-term not greater than 100 mg/l. Unfavorable to grease and mechanical impurities. When it is necessary to adopt measures to algae removal and water quality stability.

5, in and out of the pipes in the cooling tower directions by 90 °, 180 °, 270 ° rotation.

6, water distribution system is designed according to the nominal water flow, such as the actual water quantity and water differ in plus or minus 15% above, in the name of the order shall specify, in order to modify some data.

7, cooling tower water temperature less than 60 ℃, such as more than 60 ℃ shall specify when ordering.

Eight, fan blade installation Angle is adjustable, but to keep perspective. And motor current shall not exceed the rated current of the motor.

19, fan can be short-term reversal in ice at low speed.

10, when made of cooling tower water dish pool must be another "automatic feed pipe", "rapid feed pipe", "drain pipe", "overflow tube", when placing order, please noted, cost extra.