Square cross-flow FRP cooling tower

On both sides of the series of cross-flow FRP cooling tower used in the wind, on the top of the fan, make the air through the tower packing, on both sides of the medium to exchange with hot water, hot and humid air outside released back to the tower. Filler used on both sides there are salient points of wave plate, by installing head make point wave plate bonding into a whole, in order to improve the rigidity, the two sides of the convex point can also be avoided direct drop, thus improve the ability of water film formation, packing the tail has a closed water measures.

Product features:

1, save a space, light-duty structures

Using specially designed for this series of cooling tower of efficient heat transfer packing, its heat transfer area increased significantly, compared with the original HBLD series and the original HBLCD series, it covers an area of a sharp drop, due to the structural design of optimization and adopts steel structure, operating weight also greatly reduced.

2, save power,

The ventilation resistance small packing and designed by tsinghua university designed for the cooling tower wing type FRP high efficiency fan, thereby reducing the motor power, low noise machine adopts the motor power of the smaller, more save power, can also according to the requirement of the user, double speed motor to power saving.

3, low running noise

Designed by tsinghua university designed for the cooling tower FRP material wing low noise axial flow fan and designed for the cooling tower and low noise motor, so as to reduce the running noise of cooling tower. Low running noise lower noise series of cooling tower, fully meet the environmental requirements. If A two-speed motor, running at low speed in the night, still can make noise again fell by 2 to 3 db (A), the user needs A two-speed motor is to be A separate request in order.

4, good corrosion resistance

Tower body, sink and panel adopt has good corrosion resistance performance of FRP materials, and add a light stabilizer to the gel coating, has a good anti-aging performance, do not change color. Steel tower structure using galvanized processing after processing, improve the corrosion resistance performance of the cooling tower, within normal service life, without additional anti-corrosion.

5, convenient combination

Combinations can be used to meet the requirements of different working conditions, users also can be decided according to the field situation, and can according to the structure characteristics of the user, to adjust the appearance of the cooling tower. Such as user space is very limited. Our company can also be designed for the special requirements of users, to meet the requirements of the users and the performance of thermal noise.

6, maintenance is convenient

This series of cooling tower for the modular design, adjacent cooling tower air chamber separated from each other, is available in the cooling tower under the premise of normal operation, maintenance overhaul, clean packing, water pipe and water tank work more convenient.